When your LG washer displays the FE error code, it indicates that the machine is overflowing with water. This can be caused by a faulty water inlet valve, a failed water pressure switch, or a damaged pressure switch tube. To resolve the issue, you will need to replace the faulty components.
What Does FE Mean on LG Washer Key Takeaways:
- The FE error code on your LG washer signifies a filling error.
- This error code indicates that the washer fails to stop filling with water, leading to an overflowing drum.
- To prevent further flooding, it is essential to shut off the washer and disconnect it from the power source.
- Possible causes of the FE error code are a faulty water inlet valve, a faulty pressure switch, or a clogged/damaged pressure switch tube.
- To clear the FE error code, troubleshoot and resolve the underlying problem causing the error, and reset your LG washer.
What Does FE Mean on LG Washer?
The FE error code on your LG washer signifies a filling error. It indicates that the washer fails to stop filling with water, leading to an overflowing drum. This can lead to flooding in the laundry room if not addressed promptly.
To understand the meaning of FE on your LG washer, it’s important to recognize that the washer is designed to fill with water until a certain level is reached. At that point, the water inlet valve should close, preventing any further water from entering the drum. However, if the water inlet valve fails to close or there is an issue with the pressure switch, the washer will continue to fill, resulting in the FE error code.
This error code is a safety measure to prevent flooding and potential damage. It alerts you to the fact that the washer is experiencing a filling error and needs attention. By addressing the underlying cause of the FE error code, such as a faulty water inlet valve, pressure switch, or pressure switch tube, you can resolve the issue and prevent further complications.
What Does the FE Code Mean on Your LG Washer?
| Code | Meaning |
|---|---|
| FE | Filling Error |
Accompanying Symptoms of the FE Error Code
When your LG washer displays the FE error code, it is important to be aware of the accompanying symptoms. The most noticeable symptom is that your washer will overflow with water, indicating a filling error. This means that the washer fails to stop filling with water, leading to an overflowing drum. If left unaddressed, this can result in flooding in your laundry room. Therefore, it is crucial to take immediate action when you encounter the FE error code.
To prevent further flooding, the first step is to shut off the washer and disconnect it from the power source. This will ensure that no additional water enters the washer. It is also recommended to shut off the water supply to the washer to minimize the risk of any further damage. By taking these precautions, you can prevent any potential damage and keep your laundry room safe from flooding.
The FE error code is a clear indication that there is a problem with the filling process of your LG washer. By understanding the accompanying symptoms and taking the necessary steps to address the issue, you can resolve the FE error code and restore your washer to normal functioning.
| Accompanying Symptoms of FE Error Code | Actions to Take |
|---|---|
| Washer overflowing with water | – Shut off the washer and disconnect it from the power source – Shut off the water supply to the washer |
| Risk of flooding in the laundry room | – Take immediate action to prevent further damage – Clear any excess water that may have flooded the floor |
Safety Precautions Before Troubleshooting and Repairing Your LG Washer
Before you begin troubleshooting and repairing your LG washer to fix the FE error code, it is important to prioritize safety. By taking the necessary precautions, you can minimize the risk of injury and ensure a safer working environment.
Clear Excess Water
Start by clearing any excess water that may have flooded the floor around the washer. This will help prevent slipping hazards and create a safer workspace. Use towels, mops, or a wet-dry vacuum to remove the water effectively.
Disconnect Power and Water Supply
Next, ensure that the power and water supply are both disconnected before proceeding with any troubleshooting or repair work. This will help protect you from electrical shock and reduce the risk of water damage. Unplug the washer from the power outlet and shut off the water supply valve.
Protective Gear
Wearing appropriate protective gear, such as gloves and safety goggles, is also highly recommended when working on your LG washer. This will provide an extra layer of protection and safeguard against any potential accidents or injuries.
Remember, safety should always be your top priority when troubleshooting and repairing any appliance. By following these precautions, you can ensure a safer environment and minimize the risk of harm.
Table: Safety Precautions
| Precaution | Description |
|---|---|
| Clear Excess Water | Remove any excess water that may have flooded the floor to prevent slipping hazards and create a safer workspace. |
| Disconnect Power and Water Supply | Ensure that the power and water supply are both disconnected before starting any troubleshooting or repair work to protect against electrical shock and water damage. |
| Wear Protective Gear | Wear gloves and safety goggles to provide an extra layer of protection and reduce the risk of accidents or injuries. |
Possible Causes of the FE Error Code and Solutions
When your LG washer displays the FE error code, it indicates a filling error that causes the machine to overflow with water. This can be caused by a faulty water inlet valve, a failed pressure switch, or a clogged/damaged pressure switch tube.
To resolve the FE error code, you will need to diagnose and fix the underlying issue. Here are the possible causes and solutions:
1. Faulty Water Inlet Valve
The water inlet valve controls the flow of water into your washer. If it is faulty, it can cause the washer to overfill and trigger the FE error code. To fix this issue, follow these steps:
- Access the water inlet valve. You may need to remove the top or back panel of your washer.
- Disconnect the electrical connector from the faulty valve.
- Unthread the screws holding the valve in place and remove it.
- Install the new water inlet valve and secure it with screws.
2. Failed Pressure Switch
The pressure switch in your washer senses the water level in the drum and signals the washer to stop filling. A faulty pressure switch can cause the washer to overfill and display the FE error code. To fix this issue, follow these steps:
- Access the pressure switch. It is usually located near the top of the washer.
- Remove the electrical connector from the faulty switch.
- Free the switch from its holding and remove it.
- Install the replacement pressure switch and reconnect the electrical connector.
3. Clogged or Damaged Pressure Switch Tube
The pressure switch tube connects to the washer drum and works in conjunction with the pressure switch. If it is clogged or damaged, it can cause the washer to overfill and trigger the FE error code. To fix this issue, follow these steps:
- Inspect the pressure switch tube for any clogs or damage.
- If there are clogs, carefully blow through the tube to clear them.
- If the tube is damaged, replace it with a new one.
By addressing these possible causes and following the corresponding solutions, you can resolve the FE error code on your LG washer and ensure it operates properly.
Failed Water Inlet Valve and How to Fix It
If you are experiencing the FE error code on your LG washer, one possible cause is a failed water inlet valve. The water inlet valve is responsible for controlling the flow of water into your washer. When it fails, it can lead to an overflow error and trigger the FE code.
To fix the failed water inlet valve, you will need to follow these steps:
- Access the water inlet valve by removing the top panel or the rear panel of your washer, depending on the model.
- Locate the water inlet valve, which is usually located near the back of the washer.
- Disconnect the electrical connector from the valve to disable power.
- Unthread the screws that are holding the valve in place.
- Remove the old water inlet valve and replace it with a new one.
- Secure the new valve by threading the screws back in.
- Reconnect the electrical connector to restore power.
By replacing the failed water inlet valve, you can resolve the FE error code on your LG washer and prevent any further issues with overflowing.
Table: Steps to Fix the Failed Water Inlet Valve
| Step | Description |
|---|---|
| 1 | Access the water inlet valve by removing the top or rear panel of the washer. |
| 2 | Locate the water inlet valve, typically found near the back of the washer. |
| 3 | Disconnect the electrical connector to disable power. |
| 4 | Unthread the screws holding the valve in place. |
| 5 | Remove the old water inlet valve and replace it with a new one. |
| 6 | Secure the new valve by threading the screws back in. |
| 7 | Reconnect the electrical connector to restore power. |
By following these steps, you can successfully fix the failed water inlet valve on your LG washer, resolving the FE error code and ensuring proper functionality.
Faulty Pressure Switch and How to Fix It
If you’re encountering the FE error code on your LG washer, a faulty pressure switch could be the culprit. The pressure switch is responsible for sensing the water level in the drum and signaling the washer to stop filling. When it malfunctions, it can cause the washer to overfill, triggering the FE error code. Fortunately, fixing this issue is relatively straightforward.
To resolve a faulty pressure switch, you’ll need to replace it with a new one. Here’s a step-by-step guide to help you fix the problem:
- Access the pressure switch: Locate the pressure switch in your washer, usually mounted on the side of the drum or on the control panel. Remove any screws or fasteners holding it in place.
- Disconnect the electrical connector: Carefully detach the electrical connector connected to the pressure switch. Take note of the wire configuration to ensure proper reconnection later.
- Remove the faulty switch: With the electrical connector removed, free the faulty pressure switch from its holding. Be gentle to avoid damaging any surrounding components.
- Install the replacement switch: Take the new pressure switch and securely install it in place of the old one. Ensure it is properly aligned and tightly fastened.
Once you’ve completed these steps, you can test your LG washer to ensure that the FE error code no longer appears and that the washer fills correctly without overflowing. Remember to follow proper safety precautions, such as disconnecting the power and water supply, before working on your washer.
In cases where the FE error code persists even after replacing the pressure switch, it’s recommended to consult the product manual or contact LG customer support for further assistance. They can provide specific guidance based on your washer model and help you troubleshoot and resolve the issue effectively.
| Steps to Fix a Faulty Pressure Switch |
|---|
| Access the pressure switch |
| Disconnect the electrical connector |
| Remove the faulty switch |
| Install the replacement switch |
Clogged or Damaged Pressure Switch Tube
If your LG washer is displaying the FE error code, one of the possible causes could be a clogged or damaged pressure switch tube. The pressure switch tube works in conjunction with the pressure switch in your washer to regulate the water level. If this tube gets clogged or damaged, it can lead to the washer overfilling and triggering the FE error code.
To troubleshoot this issue, you can inspect the pressure switch tube for any visible clogs or damage. If you notice any debris or blockages, you can try clearing them by gently blowing through the tube or using a small brush to remove the obstruction. However, if the tube is visibly damaged or worn, it is recommended to replace it with a new one.
To replace the pressure switch tube, you will need to access the back of your LG washer and locate the tube connecting to the pressure switch. Carefully disconnect the tube from both the pressure switch and the washer drum. Then, connect the new pressure switch tube to the corresponding connectors, ensuring a secure and tight fit. Once the new tube is properly installed, you can test the washer to see if the FE error code has been resolved.
Table: Steps to Replace a Clogged or Damaged Pressure Switch Tube
| Steps | Instructions |
|---|---|
| 1 | Disconnect the washer from the power source and shut off the water supply. |
| 2 | Access the back of your LG washer and locate the pressure switch tube. |
| 3 | Carefully disconnect the tube from both the pressure switch and the washer drum. |
| 4 | Remove the old pressure switch tube and dispose of it properly. |
| 5 | Connect the new pressure switch tube to the corresponding connectors, ensuring a secure fit. |
| 6 | Turn on the water supply and reconnect the washer to the power source. |
| 7 | Run a test cycle to check if the FE error code has been resolved. |
How to Clear the FE Error Code on Your LG Washer
If you’re facing the FE error code on your LG washer, don’t worry – it can be resolved. Follow these steps to clear the error code and get your washer back to working condition:
- Shut off all power to the washer: This includes disconnecting it from the power source.
- Press and hold the Start/Pause button: Hold the button for about 5 seconds.
- Release the button: After holding it for 5 seconds, let go of the Start/Pause button.
By following these steps, you will reset your LG washer and clear the FE error code. Once the code is cleared, you can proceed with testing your washer to ensure it is functioning correctly.
Pro tip: If the FE error code persists even after clearing it, it is recommended to consult the product manual or reach out to LG customer support for further assistance.
Table: Troubleshooting Steps for Clearing FE Error Code
| Steps | Description |
|---|---|
| Step 1 | Shut off all power to the washer |
| Step 2 | Press and hold the Start/Pause button for 5 seconds |
| Step 3 | Release the Start/Pause button |
How to Test Your LG Washer After Fixing It
Once you have successfully resolved the FE error on your LG washer by replacing the faulty components, it is crucial to test the machine to ensure that it is functioning correctly. Testing your washer will help you verify that the error code no longer appears and that the filling issue has been resolved.
To test your LG washer after fixing the FE error, start by selecting the shortest wash program available. Initiate the wash cycle and pay close attention to the filling stage. The drum should fill with water without any error codes or signs of overflowing. This indicates that the FE error has been effectively addressed.
For a more comprehensive test, you can enter the diagnostics mode of your LG washer. This mode allows you to check for any error codes and ensures that all functions of the washer are working properly. To enter the diagnostics mode, put your washer on standby, then press and hold the Soil Level and Spin Speed buttons simultaneously. Finally, press the Power button to initiate the diagnostics mode. Progress through each testing stage by pressing the Start/Pause button. Once the washer turns off, you have completed the diagnostics mode. This thorough testing will provide you with additional confidence in the functionality of your LG washer.
Table: LG Washer Diagnostics Mode Testing
| Testing Stage | Instructions |
|---|---|
| 1. Test the Motor | Press the Start/Pause button to initiate testing. |
| 2. Test the Water Valve | Press the Start/Pause button to initiate testing. |
| 3. Test the Water Level Sensor | Press the Start/Pause button to initiate testing. |
| 4. Test the Spin Motor | Press the Start/Pause button to initiate testing. |
| 5. Test the Drain Motor | Press the Start/Pause button to initiate testing. |
| 6. Test the Heater | Press the Start/Pause button to initiate testing. |
By testing your LG washer after resolving the FE error, you can ensure that the issue has been effectively resolved and that your washer is functioning properly. If any error codes or signs of malfunctioning persist, it is recommended to consult the product manual or contact LG customer support for further assistance.
How to Enter Diagnostics Mode on Your LG Washer
If you’re experiencing the FE error code on your LG washer, entering the diagnostics mode can help you identify any specific issues and error codes. Follow these steps to access the diagnostics mode on your LG washer:
- Put your washer on standby mode by ensuring it is powered off and not actively running a cycle.
- Press and hold the Soil Level and Spin Speed buttons simultaneously.
- While holding the Soil Level and Spin Speed buttons, press the Power button.
- Continue holding all three buttons until the display panel lights up and the washer enters the diagnostics mode.
- To progress through each testing stage, press the Start/Pause button.
- Once you have completed the diagnostics mode, the washer will turn off, indicating that you have exited the mode.
Entering the diagnostics mode allows you to test different functions of your LG washer and view any error codes that may be present. This information can be useful in diagnosing and troubleshooting the FE error code, as well as other potential issues with your washer.
Remember to always prioritize safety while working on your washer. Before entering the diagnostics mode or attempting any repairs, ensure that the power and water supply to the washer are disconnected. Take precautions to avoid electrical hazards and injury.
Refer to the table below for a summary of the steps to enter diagnostics mode on your LG washer.
| Steps to Enter Diagnostics Mode on LG Washer |
|---|
| 1. Put your washer on standby mode |
| 2. Press and hold Soil Level and Spin Speed buttons |
| 3. While holding the buttons, press the Power button |
| 4. Washer enters diagnostics mode |
| 5. Press Start/Pause button to progress through each testing stage |
| 6. Washer turns off, exiting diagnostics mode |
Conclusion
Understanding what the FE error code means on your LG washer is essential to address the filling error and prevent further complications. By identifying and fixing the underlying issues, such as a faulty water inlet valve, pressure switch, or pressure switch tube, you can resolve the FE error code and restore your washer to peak performance.
To summarize, the FE error code on your LG washer signifies a filling error, indicating that the washer fails to stop filling with water, leading to an overflowing drum. This can be caused by a faulty water inlet valve, a failed pressure switch, or a clogged/damaged pressure switch tube. It is important to prioritize safety before troubleshooting and repairing your washer, and to follow proper maintenance practices to prevent future error codes.
In conclusion, understanding the meaning of the FE error code and addressing the underlying issues will help you clear the error code and ensure that your LG washer operates smoothly. Remember to refer to the product manual or contact LG customer support for further assistance and guidance specific to your washer model.
Additional Tips and Advice
Here are some additional tips and advice to help you prevent and fix the FE error code on your LG washer:
- Regular cleaning: Make it a habit to clean the drum and filters of your washer regularly. This helps remove any debris or buildup that can obstruct the water flow and cause errors like FE.
- Avoid overloading: Overloading the washer can put excessive strain on its components and lead to malfunctioning. Be mindful of the recommended load capacity and evenly distribute the clothes to ensure proper water circulation.
- Use appropriate detergent: Using the right type and amount of detergent is crucial for optimal washer performance. Excessive suds can interfere with the water level sensing and trigger error codes. Follow the manufacturer’s recommendations for detergent usage.
“Regular cleaning, avoiding overloading, and using appropriate detergent are key practices to keep your LG washer running smoothly.”
By following these tips, you can minimize the occurrence of the FE error code and keep your LG washer functioning efficiently. Remember to always prioritize safety and consult the product manual or LG customer support for specific troubleshooting guidance tailored to your washer model.
| Tips | Benefits |
|---|---|
| Regular cleaning | Prevents debris buildup and improves water flow |
| Avoid overloading | Prevents strain on components and ensures proper water circulation |
| Use appropriate detergent | Minimizes excessive suds and interference with water level sensing |
Explore Further Resources
If you’re looking for more information on troubleshooting the FE error code on your LG washer, there are valuable resources available to assist you. One of the first places to check is your product manual. It provides specific guidance tailored to your washer model and can help you understand the meaning of the FE error code.
If you’re unable to find the answers you need in the manual, reaching out to LG customer support is a great option. Their knowledgeable representatives can provide expert advice and assistance in resolving the FE error code effectively. They can walk you through troubleshooting steps, recommend solutions, and answer any questions you may have.
Remember, understanding the meaning of the FE error code is the first step towards resolving the issue with your LG washer. By exploring these further resources, you can equip yourself with the knowledge and support needed to troubleshoot and overcome the FE error code, ensuring your washer gets back to optimal performance.
Conclusion
In conclusion, understanding what the ‘FE’ error code on your LG washer means is crucial for ensuring the longevity and efficiency of your appliance. This error, signaling a Water Overflow Error, can stem from a variety of issues including a faulty water inlet valve, a malfunctioning pressure switch, or a blocked hose. Addressing this error promptly can save you time, money, and the hassle of dealing with water damage or inefficient washing cycles.
To tackle this issue, ensure you follow the troubleshooting steps provided and regularly maintain your washer to prevent future occurrences. If you find yourself uncertain or in need of additional assistance, do not hesitate to consult the official LG Support website LG Washer Support for the most accurate and reliable information directly from the manufacturer.
For more in-depth guides, tips, and solutions for common washer issues, be sure to explore our extensive resources at ApplianceTweak washing machine category. Our comprehensive articles and step-by-step guides are designed to empower you with the knowledge and confidence to handle a wide array of appliance-related challenges.
By taking proactive steps to understand and resolve the ‘FE’ error code on your LG washer, you are ensuring the efficient operation of your appliance and contributing to a smoother, more reliable laundry routine. Don’t let appliance errors disrupt your day—equip yourself with the knowledge and resources you need to tackle issues head-on and keep your household running smoothly.
FAQ
What does the FE code mean on your LG washer?
The FE code on your LG washer indicates a filling error. It means that the washer fails to stop filling with water, leading to an overflowing drum.
What are the accompanying symptoms of the FE error code?
When the FE error code appears, you may notice that your LG washer overflows with water, potentially causing flooding in the laundry room.
What safety precautions should be taken before troubleshooting and repairing your LG washer?
Prioritize safety by clearing any excess water, ensuring the power and water supply are disconnected, and taking precautions to reduce the risk of injury and electrocution.
What are the possible causes of the FE error code and their solutions?
The FE error code can be caused by a faulty water inlet valve, a faulty pressure switch, or a clogged/damaged pressure switch tube. To fix it, you will need to replace the faulty component.
How can you fix a failed water inlet valve?
To fix a failed water inlet valve, you will need to access the valve, disconnect the electrical connector, unthread the screws, and install a new valve.
What should you do if you have a faulty pressure switch?
If you have a faulty pressure switch, you should access the switch, remove the electrical connector, free the switch from its holding, and install a replacement switch.
How can you address a clogged or damaged pressure switch tube?
To address a clogged or damaged pressure switch tube, inspect and blow through it to identify any clogs. Replace the pressure switch tube with a new one if necessary.
How can you clear the FE error code on your LG washer?
To clear the FE error code, troubleshoot and resolve the underlying problem causing the error. Once fixed, you can reset your LG washer by shutting off all power, pressing and holding the Start/Pause button for 5 seconds, and then releasing it.
How can you test your LG washer after fixing the FE error?
To test your LG washer after fixing the FE error, select the shortest wash program and ensure it progresses through the filling stage without any error codes or overflowing.
How can you enter diagnostics mode on your LG washer?
To enter diagnostics mode, put your washer on standby, press and hold the Soil Level and Spin Speed buttons simultaneously, and then press the Power button. Progress through each testing stage by pressing the Start/Pause button.
Are there any additional tips and advice regarding the FE error code on your LG washer?
Yes, it is important to follow proper maintenance practices such as cleaning the drum and filters regularly, avoiding overloading the washer, and using appropriate detergent to prevent excessive suds.
Where can you find further resources for troubleshooting the FE error code on your LG washer?
For more information and assistance, refer to the product manual or contact LG customer support for specific guidance tailored to your washer model.
